top of page
3B3D, STAR PLA 3D Printer Filament

Thanks to the special silvery structure of 3B3D PLA Star® Filaments, the layer lines on the prints appear smoother. Since it has the same properties as 3B3D PLA® Filaments, prints with excellent surface quality can be obtained.

Spool sizes: 200mm diameter width 75mm

Extruder Temperature

200-230°C

Does not require special "Hot-end"

Bed Temperature

60-75°C

Can be turned off optionally

Nozzle Specs

0,4 mm nozzle

Standard brass can be preferred

Cooling Specs

Fan Speed: 100%

Cooling fan required

Drying Specs

50°C for 4 hours

Maximum value when needed

Heated Chamber

Suitable for open printers,

Does not require a closed or heated chamber

 

 

Physical and Chemical Properties

  • Invisible layers with its glittery structure
  • High tensile and impact strength
  • Low chemical resistance
  • High printing speed
  • Very low warping behavior
  • Excellent surface quality
  • Very low odor
  • Renewable natural raw material
  • Compatibility with all printers

 

3B3D PLA Star® Filament Usage Details

 

Printing DifficultyVery easy
Temperature Resistance60 °C
ToughnessAverage
WarpingNo
OdorLow
Print Surface FinishAverage
Dissolution BehaviorVery Difficult
FlexibilityLow
Print SpeedFast
Detailed PrintBelow 0.2 mm
Nozzle AbrasionNone
Support SeparationAverage

 

Filament Data Sheet download

 

NOTE:

There may be a risk of nozzle clogging due to the glitter reinforcements in it, therefore it is recommended to use 0.4 mm and above nozzles.

3B3D, STAR PLA 3D Printer Filament

16,99£Fiyat
colour
    bottom of page